RCD TESTER KEW 5410

Specification

Measurement of RCD trip time – Measurement of trip out current
	Range		× 5	× 1	× 1/2	AUTO RAMP(mA)
	Rated Voltage		100V±10% 200V-10 to +32% 400V±10% 50/60Hz
	Test current		15/30/50/100mA	15/30/50/100/200/500mA
	Measuring range		Testing time 0 to 200ms	Testing time 0 to 2000ms		40 to 110% of lΔn (goes up by 5%) Testing time 300ms × 15steps
	Accuracy	Trip Time	1%rdg±3dgt			Test Current at each step -4 to +4%
	Accuracy	Trip Time	+2 to +8%dgt		-8 to -2%dgt	Test Current at each step -4 to +4%
Voltage Measurement
	Measuring range		80 to 450V 50/60Hz
	Accuracy		2%rdg±4dgt
Applicable standards			IEC 61010-1 CAT Ⅲ 300V / CAT Ⅱ 400V Pollution degree2 IEC 61010-031, IEC 61557-1, 6 IEC 60529 (IP54)
Display			1999 counts (3 1/2digits), Large LCD
Operating temperature and humidity range			0 to 40ºC, relative humidity 85% (no condensation)
Storage temperature and humidity range			-20 to 60ºC, relative humidity 75% (no condensation)
Insulation resistance			50MΩ or more / 1000V (between electrical circuit and enclosure)
Sleep Function			(1)Automatically enters Sleep mode in 3 minutes after the last switch operation (current consumption 75µA). This function doesn’t work at voltage measurements. To exit from the Sleep mode, set the Function switch to OFF position once, and re-set it to the Range at which a measurement to be conducted. (2) Backlight turns off in 1 minute after it lights up.
Power source			DC 12V / R6(AA)(1.5V) × 8
Dimension			167(L)×186(W)×89(D)mm
Weight			Approx. 965g (including batteries)
Possible number of Measurements			1200 times or more (measure every 30 seconds at ×1/2 Range, lΔn=100mA)
مُكَمِّلات			7128A (Test leads) 7129A (Test lead with alligator clip) 8017 (Extension prod long) × 2 9121 (Shoulder strap) 9147 (Cord case) Instruction manual, R6(AA) × 8

Brand	KYORITSU

Brand

KYORITSU

Measurement of RCD trip time
Conducting testing of rated residual non-operating currents at × 1/2 Range, measuring RCD trip time at × 1 and × 5 Ranges

Measurement of RCD trip time
Conducting testing of rated residual non-operating currents at × 1/2 Range, measuring RCD trip time at × 1 and × 5 Ranges
Measurement of trip out current
Measuring trip out current by varying current automatically
Remote Test
Enabling a user to hold the Test Leads with his both hands by locking the Test Button
Measurement will automatically start when the main voltage is detected
Voltage Measurement
Carrying out a constant measurement of voltage in the stand-by mode at each Range
Auto-detection of Contact voltage
Detecting the voltage to earth of Earth electrodes or Protective conductors during RCD test
– when applying test currents – at measurement using EARTH in order to prevent electrical shocks caused by the damaged earth
Measurement will be ceased at AC50V or more
Dust and Water proof
Dust and Water proof construction (designed to IEC 60529 IP54)
Backlight
Facilitating working at dimly illuminated locations

نمط الصيف

RCD TESTER KEW 5410

Specification

Measurement of RCD trip time – Measurement of trip out current

Voltage Measurement

مراجعة

ميسيناس إياكوليس

أديبيسينج كونفاليس بولوم

AC CLAMP METER MODEL 2002R

AC/DC CLAMP METER KEW 2055

Fumasi Hex car socket wrenches 1/2” long – فومازي حبة بوكس طويل

Unior Click type torque wrench – يونيور يد شد عزم (35-350)

Unior Internal lock rings pliers, straight – يونيور زرادية تيلا داخلي عدل 180مم

Unior Screwdriver set TBI – يونيور طقم مفك

ديولت صاروخ 4.5″ | 115مم 730 واط – DeWalt Angle Grinder 115mm 730W with Toggle Switch – DWE4010T-B5

فومازي مفك تيسيتر صغير – TESTER FOR POCKET BI-COMP. PLUS ISO 2380-1

نمط الصيف

RCD TESTER KEW 5410

Specification

Measurement of RCD trip time – Measurement of trip out current

Voltage Measurement

مراجعة

ميسيناس إياكوليس

أديبيسينج كونفاليس بولوم

منتجات ذات صلة